====== KU060 Die Dimensions ======


Scott,

Got it.  See attached.  Is this enough?

The 0,0 coordinate for this data is die facing you, bottom left corner.

So, the die is rotated 90 degrees CCW, flipped, placed in package.  My view (and dimensions) should be same orientation as Vivado Floorplan view.

The key here is GTH_quad_left which is where I start, x=0, y= ~ 9.7mm.  DSP columns are left to right across the die.  DSP columns span y=bottom, to y=top ( 0 to 9.7mm).

This make sense?

Accuracy is +/- 50 um, as there is die seal ar edges ~ 25 um all around.  I am at the beginning of the dsp column (x value).

Austin

{{ :projects:kintex_ultrascale:dims_4_scott_ku060.txt |}}